Hosetails (Hose Tail Fittings)
Hose tail fittings are commonly known as hosetails and are used to connect flexible hose to a threaded outlet on tanks, pumps and pipework. The barbed ‘tail’ grips the inside of the hose to create a secure connection when used with a hose clip. Ideal for water transfer, irrigation, fuel and general fluid handling systems.
They are available in a range of thread sizes and hose diameters as well as plastic or brass materials. Read More When selecting a hosetail fitting, match; For a watertight seal, PTFE tape is recommended on all male BSP threaded fittings. The correct size hose clip should also be used to secure the hose to the tail.Suitable for;
Choosing the right hosetail
Fitting a hosetail
Water Tank Categories
Fittings For 1/2" BSP Outlets
1/2″ BSP x 13mm 90 Degree Elbow Hosetail Connector – Male Thread Hose Fitting
![3/4″ BSP Male 90 Degree Elbow Hosetail x 20mm Hose Connector [Wydale]](https://www.onlinetankstore.co.uk/wp-content/uploads/2026/02/HT34X20D90-247x247.png)
Water Tank Categories
3/4″ BSP Male 90 Degree Elbow Hosetail x 13mm Hose Connector
Fittings For 3/4" BSP Outlet
Fittings For 3/4" BSP Outlet
3/4″ BSP Male 90 Degree Elbow Hosetail x 20mm Hose Connector
Water Tank Categories
Water Tank Categories
1″ BSP x 25mm 90 Degree Elbow Hosetail Connector – Male Thread Hose Fitting
Water Tank Categories
1 1/4″ BSP Male 90 Degree Elbow Hosetail x 40mm Hose Connector
Water Tank Categories
1 1/2″ BSP Male 90 Degree Elbow Hosetail x 40mm Hose Connector
Fittings For 1/2" BSP Outlets
Hosetail Kit 6 for 1/2″ Outlet – 1/2″ BSP Male Brass Hosetail x 13mm Hose Connector
Fittings For 1" BSP Outlets
Hosetail Kit 1 for 1″ Outlet – 1″ BSP Male Brass Hosetail x 25mm Hose Connector
Fittings For 3/4" BSP Outlet
Hosetail Kit 3 for 3/4″ Outlet – 3/4″ BSP Male Brass Hosetail x 20mm Hose Connector
Fittings For 3/4" BSP Outlet
Hosetail Kit 5 for 3/4″ Outlet – 3/4″ BSP Male Brass Hosetail x 12mm Hose Connector
Fittings For 1" BSP Outlets
Hosetail Kit 2 for 1″ Outlet – 1″ BSP Male Brass Hosetail x 20mm Hose Connector
Fittings For 1" BSP Outlets
Hosetail Kit 4 for 1″ Outlet – 1″ BSP Male Brass Hosetail x 12mm Hose Connector
Hosetails (Hose Tail Fittings) FAQs
Is the size shown the hose size or the thread size?
Both are shown. For example:
3/4" BSP x 20mm hosetail
-
- 3/4" BSP = thread size
- 20mm = hose internal diameter (ID
Is BPS the same as metric?
No. BSP (British Standard Pipe) refers to the thread type, not the hose size. The hose size is usually shown in millimetres (mm).
A BSP fitting of 3/4" will not metrically measure 3/4" on a tape measure.
What size hosetail will fit a standard garden hose?
The majority of UK garden hoses have an internal diameter (ID) of 12 - 13mm so a 13mm hosetail should be correct. Always check your hose size before ordering.
Do I need PTFE tape on the threads?
Yes. For all male BSP threaded fittings, PTFE tape is the item that creates a watertight seal and will prevent leaks. At least 12 wraps are recommended by the manufacturer.
Is BSP the same as NPT?
No. BSP and NPT are different thread standards and are not directly compatible. Using the wrong type can cause leaks.
What’s the difference between male and female BSP?
Male BSP = external thread (screws into a fitting)
Female BSP = internal thread (fitting screws into it)
Hosetails are most commonly supplied with male BSP threads. If you need to connect a hose tail to a male thread, you may need a connector in order to do so.
Will a hosetail restrict water flow?
The smaller the hose connection, the more the flow will be reduced. For a higher flow, choose the largest hose diameter your outlet can support.
eg. 1" BSP outlet commonly suits 25mm hose.