Each Water Storage Tank comes with a standard outlet, manufactured in a set position on the tank. It might be that this doesn't fit your requirements and if so, we can fit additional outlets (referred to as spin welds). This might be helpful if you require multiple outlets or you need an outlet in a specific position to fit a particular project or application. Made out of plastic material, the spin weld sockets are BSP threaded.

We get a large number of inquiries about whether it is possible to remove the standard metal outlet to avoid metal contamination. Instead of removing it, we are able to leave this outlet 'undrilled' meaning that the metal insert does not come into contact with the contents of the tank. This is particularly useful when using the tanks around saltwater, where there is potential to rust. We are then able to use plastic spin weld to create your outlet in its place. For further guidance of our Water Storage Tanks range, view our 'What Water Storage Tank Do I need?' post here.

The Spin Welds come in the following sizes – All BSP (British Standard Pipe) threads:

  • 1/2 Inch Female
  • 3/4 Inch Female
  • 1 inch Female
  • 1 1/4 Inch Female
  • 1 1/2 inch Female
  • 2 Inch Female

Example of a 105 Litre Technical Drawing, marked up for Spin Weld placement

The above image shows an example of a marked technical drawing for the placement of a new Spin Welds (see lines marked in red).

See the below examples of 3 x 1 inch Spin Welds fitted to the 175 Litre flat water tank.

How to order

To ensure we get it right first time, contact us either via the live chat (located on the bottom right hand side of the screen) or use the contact us page and fill in the contact form. One of the team will be in contact very soon after to discuss your requirements. Once we understand what you need we will email you a drawing to mark the position(s) and dimensions of the Spin Welds on the tank. Ensure you label each item and once complete, send it back to us to take it from there.

See the below example of 3 x 1 inch female Spin Welds fitted to the 175 Litre flat water tank.

1 1/4 Fusion Socket

How to order

To ensure we get it right first time, contact us either via the live chat (located on the bottom right hand side of the screen) or use the contact us page and fill in the contact form. One of the team will be in contact very soon after to discuss your requirements. Once we understand what you need we will email you a drawing to mark the position(s) and dimensions of the Spin Welds on the tank. Ensure you label each item and once complete, send it back to us to take it from there.

View our Fusion Range below

£30.00 Exc VAT (£36.00 Inc VAT)

Spin Weld Outlets

2 Inch Spin Weld

£29.10 Exc VAT (£34.92 Inc VAT)

Spin Weld Outlets

1 1/2 Inch Spin Weld

£18.90 Exc VAT (£22.68 Inc VAT)

Spin Weld Outlets

1 1/4 Inch Spin Weld

£18.80 Exc VAT (£22.56 Inc VAT)

Spin Weld Outlets

3/4 Inch Spin Weld

£13.50 Exc VAT (£16.20 Inc VAT)

Spin Weld Outlets

1/2 Inch Spin Weld

£12.50 Exc VAT (£15.00 Inc VAT)

Spin Weld Outlets

1 Inch Spin Weld

£13.60 Exc VAT (£16.32 Inc VAT)