7500 Litre Platin Indirect Rainwater Harvesting System

£3,445.00 Exc VAT

(£4134.00 Inc VAT)

Shipping 5 – 7 Working Days
Free UK Mainland Delivery

Frequently bought together with;
7500 Litre Platin Indirect Rainwater Harvesting System
+Vehicle Loading Lid - 3.5 Ton

Product Description

This 7500 Litre Platin Indirect Rainwater Harvesting System is designed to go underground and supply water to both home and garden. With the Platin Indirect Rainwater Harvesting System, there is a pressure-sensitive pump located in the underground tank, when a valve or tap is opened water will be pumped under pressure until the valve is closed. This allows the system to repressurise turning the power off to the pump. The water is gravity-fed from the Header Tank to the toilets, washing machine etc and is all automatic. Whenever there is a demand for water, the harvested rainwater will be gravity fed to the toilet from the header tank and then the pump inside the underground tank tops up the header tank.

Key Benefits

  • Simple & quick to install
  • Submersible pump supplies harvested rainwater on demand to the header tank where it is then gravity-fed to the WCs & washing machine
  • The header tank controls the operation of the system
  • Dual valve system within the header tank prioritises rainwater supply over mains water, maximising the use of all available rainwater to save on mains water consumption
  • Mains water switchover point is at a lower level in the header tank and becomes operational when rainwater is not available from the underground Platin tank
  • Mains water backup supply is not reliant on power supply or pump pressure and therefore guarantees supply of water to WCs at all times

Popular Uses 

  • Flushing Toilets
  • Washing Machines
  • Garden Irrigation
  • Outside Garden Tap

Specification

  • Telescopic lid (choice of telescopic lid available, depending on tank location)
  • Minimax filter supplied in accordance with the type of tank
  • Submersible pump with floating water intake
  • Float switch (connected from mains water backup unit to the underground tank)
  • Header tank package

Additional Components Required For Installation (Not supplied)

  • 100mm diameter duct pipe to contain; float sensor cable, power cable for the pump, also bringing mains water to underground tank as and when required.
  • 100mm diameter drainage pipe connected from downpipes to the inlet at the top of the tank (all downpipes brought into one pipe for connection to the filter.
  • 100mm diameter pipe for overflow from the tank to mains drainage network

Installation & Commissioning

Installation Guide 

Watch the GRAF Installation video here 

Product Specification
Weight 360 kg
Dimensions L 3600 x W 2250 x H 1565 mm
Potable Material

Manufacturer

Capacity

Warranty

Tank 15 years – Parts 2 years

Delivery and Returns

The shipping cost for standard postcodes within UK Mainland will be calculated at the checkout when a postcode is entered.

Parts of the following areas may be more expensive. See below;

  • Scottish highlands and islands including areas of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland, Republic of Ireland.

The below postcodes may be subject to additional postage charges;

  • AB, BT, CA, CT, DD, DG, EH, FK,G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE
    Southern Ireland.

Please call before ordering if the postcode is listed above. Click here for our contact details.

Some of our products are only available for England & Wales delivery only as standard and this will be stated in the product description. Please get in touch if you are outside of this area and we can obtain a quotation for you.

Delivery Lead Times

See individual products for expected delivery times. If an order is to take longer than expected, we will email you with this information.
Custom orders may take longer than the standard stated time – please enquire. Due to the location of stock, items on your order may also be delivered separately.

Delivery Method

All items (unless otherwise stated on the product page) are delivered to Kerbside. In some instances for the larger items, customer offloading may be required.

Somebody will need to be in to receive and check the goods before signing for them. It is possible to arrange for the goods to be left in a safe place but this is at the risk of the customer and should anything happen to the goods once they have been left, we will be unable to support this.

IMPORTANT – In signing for the goods, you are agreeing that the item packaging is intact. If damage is found after this point, collection or redelivery cost will be down to the customer.

A book-service may be available in some instances. If there are specific timings for your delivery, please add them into the customer notes section on the order.

Missing/Faulty Parts

In the unlikely event that you find there are items missing from your order, please contact us within 14 days of the goods arrival and we will be able to correct this. Note that we may ask for a picture of the goods that have arrived – this will be required by the manufacturer of the goods in order to provide the missing/replacement parts.

If your items have arrived in a sub-standard condition, please email contact@onlinetankstore.co.uk with the following detail;

  • Order Number
  • Photos of the damage or fault
  • Brief explanation of the issues

This will allow us to deal with the matter as swiftly as possible in order to reduce the inconvenience caused.

Delivery Charges

Please ensure the product you order from Online Tank Store Ltd. is the correct size & suitable for your specific use. All standard tanks (i.e. no customisation) are returnable but will be subject to a restocking charge and must be returned in A1 condition. It can be expensive for the customer to return due to the size and weight. Please ensure what you order is what you require. Read our full returns policy here before ordering.

If a delivery has been attempted and failed 3 times, the item will be taken back to the depot and redelivery charges will apply.

Special order or custom tanks are non-returnable therefore if your order is the incorrect product or no longer required unfortunately, it will not be accepted back and no refund will be given.

Our full returns and refund policy can be found by clicking here.

It is important to us that the items you order are correct for your needs however, we understand that situations and requirements can change. It can be costly to return an order so please ensure you are certain of your requirements before you order and that you have read the returns policy above for details.

Custom Tank – An order is considered ‘custom’ when a non-standard configuration or colour is requested. Custom orders are not eligible for return so please ensure the product is what you require before ordering. By purchasing, you are agreeing to the above terms.


International Delivery Information
Request a Proforma Invoice

Product Description

This 7500 Litre Platin Indirect Rainwater Harvesting System is designed to go underground and supply water to both home and garden. With the Platin Indirect Rainwater Harvesting System, there is a pressure-sensitive pump located in the underground tank, when a valve or tap is opened water will be pumped under pressure until the valve is closed. This allows the system to repressurise turning the power off to the pump. The water is gravity-fed from the Header Tank to the toilets, washing machine etc and is all automatic. Whenever there is a demand for water, the harvested rainwater will be gravity fed to the toilet from the header tank and then the pump inside the underground tank tops up the header tank.

Key Benefits

  • Simple & quick to install
  • Submersible pump supplies harvested rainwater on demand to the header tank where it is then gravity-fed to the WCs & washing machine
  • The header tank controls the operation of the system
  • Dual valve system within the header tank prioritises rainwater supply over mains water, maximising the use of all available rainwater to save on mains water consumption
  • Mains water switchover point is at a lower level in the header tank and becomes operational when rainwater is not available from the underground Platin tank
  • Mains water backup supply is not reliant on power supply or pump pressure and therefore guarantees supply of water to WCs at all times

Popular Uses 

  • Flushing Toilets
  • Washing Machines
  • Garden Irrigation
  • Outside Garden Tap

Specification

  • Telescopic lid (choice of telescopic lid available, depending on tank location)
  • Minimax filter supplied in accordance with the type of tank
  • Submersible pump with floating water intake
  • Float switch (connected from mains water backup unit to the underground tank)
  • Header tank package

Additional Components Required For Installation (Not supplied)

  • 100mm diameter duct pipe to contain; float sensor cable, power cable for the pump, also bringing mains water to underground tank as and when required.
  • 100mm diameter drainage pipe connected from downpipes to the inlet at the top of the tank (all downpipes brought into one pipe for connection to the filter.
  • 100mm diameter pipe for overflow from the tank to mains drainage network

Installation & Commissioning

Installation Guide 

Watch the GRAF Installation video here 

Product Specification
Weight 360 kg
Dimensions L 3600 x W 2250 x H 1565 mm
Potable Material

Manufacturer

Capacity

Warranty

Tank 15 years – Parts 2 years

Delivery and Returns

The shipping cost for standard postcodes within UK Mainland will be calculated at the checkout when a postcode is entered.

Parts of the following areas may be more expensive. See below;

  • Scottish highlands and islands including areas of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland, Republic of Ireland.

The below postcodes may be subject to additional postage charges;

  • AB, BT, CA, CT, DD, DG, EH, FK,G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE
    Southern Ireland.

Please call before ordering if the postcode is listed above. Click here for our contact details.

Some of our products are only available for England & Wales delivery only as standard and this will be stated in the product description. Please get in touch if you are outside of this area and we can obtain a quotation for you.

Delivery Lead Times

See individual products for expected delivery times. If an order is to take longer than expected, we will email you with this information.
Custom orders may take longer than the standard stated time – please enquire. Due to the location of stock, items on your order may also be delivered separately.

Delivery Method

All items (unless otherwise stated on the product page) are delivered to Kerbside. In some instances for the larger items, customer offloading may be required.

Somebody will need to be in to receive and check the goods before signing for them. It is possible to arrange for the goods to be left in a safe place but this is at the risk of the customer and should anything happen to the goods once they have been left, we will be unable to support this.

IMPORTANT – In signing for the goods, you are agreeing that the item packaging is intact. If damage is found after this point, collection or redelivery cost will be down to the customer.

A book-service may be available in some instances. If there are specific timings for your delivery, please add them into the customer notes section on the order.

Missing/Faulty Parts

In the unlikely event that you find there are items missing from your order, please contact us within 14 days of the goods arrival and we will be able to correct this. Note that we may ask for a picture of the goods that have arrived – this will be required by the manufacturer of the goods in order to provide the missing/replacement parts.

If your items have arrived in a sub-standard condition, please email contact@onlinetankstore.co.uk with the following detail;

  • Order Number
  • Photos of the damage or fault
  • Brief explanation of the issues

This will allow us to deal with the matter as swiftly as possible in order to reduce the inconvenience caused.

Delivery Charges

Please ensure the product you order from Online Tank Store Ltd. is the correct size & suitable for your specific use. All standard tanks (i.e. no customisation) are returnable but will be subject to a restocking charge and must be returned in A1 condition. It can be expensive for the customer to return due to the size and weight. Please ensure what you order is what you require. Read our full returns policy here before ordering.

If a delivery has been attempted and failed 3 times, the item will be taken back to the depot and redelivery charges will apply.

Special order or custom tanks are non-returnable therefore if your order is the incorrect product or no longer required unfortunately, it will not be accepted back and no refund will be given.

Our full returns and refund policy can be found by clicking here.

It is important to us that the items you order are correct for your needs however, we understand that situations and requirements can change. It can be costly to return an order so please ensure you are certain of your requirements before you order and that you have read the returns policy above for details.

Custom Tank – An order is considered ‘custom’ when a non-standard configuration or colour is requested. Custom orders are not eligible for return so please ensure the product is what you require before ordering. By purchasing, you are agreeing to the above terms.