100 Litre Prestige 2.0 Wall Mounted Water Butt
Make better use of your available garden space with this 100 litre wall mounted water butt. The Prestige 2.0 offers a slimline rainwater storage solution designed to mount neatly against an external wall.
With a depth of just 250mm, the Prestige 2.0 is particularly well suited to smaller gardens, patios and areas where a conventional round water butt would take up too much valuable floor space. Its clean, contemporary appearance also makes it a great option where the water butt will remain visible alongside the property.
Designed and manufactured in the UK from durable MDPE, the tank holds up to 100 litres of collected rainwater, providing a convenient supply for watering plants, filling watering cans and other general garden uses.
Integrated Rainwater Collection
Unlike a traditional water butt installation that relies on a separate external diverter, the Prestige 2.0 is designed to work directly with the property’s downpipe.
Rainwater flowing through the downpipe is collected within the water butt. Once the tank reaches capacity, excess rainwater is automatically directed back through the downpipe via the integrated overflow arrangement.
The system is suitable for round or square UK downpipes up to 80mm and can be installed centrally around the downpipe or offset where the installation requires it.
Slimline Wall Mounted Design
At only 250mm deep, this slimline wall mounted water butt offers useful rainwater storage without occupying a large area of your garden or patio.
Mounting the tank against the wall also positions the outlet at a convenient height, making it easier to place a watering can beneath the tap without the need for a separate water butt stand.
Key Features
- 100 litre rainwater storage capacity
- Space-saving wall mounted design
- Only 250mm deep
- Suitable for round and square downpipes up to 80mm
- Integrated rainwater collection and overflow
- No conventional external water butt diverter required
- Two ¾” BSP female brass outlets
- Brass tap with snap-lock fitting included
- Tap can be positioned on either side
- Multiple water butts can be linked together
- Manufactured from durable MDPE
- Designed and manufactured in the UK
What’s Included
- ¾” brass tap with snap-lock fitting
- 2 × Fischer base fixings
- 2 × Fischer top fixings
- Installation instructions
Please note: The supplied fixings are intended for plain-faced solid brickwork. The supporting wall must be suitable for the load of the water butt when full, which is approximately 110kg. Different wall constructions may require alternative specialist fixings.














