Shurflo Pumps
Taps, outlets, hosetails, lids, pumps and fittings for plastic water tanks, from 1/2″ to 3″ BSP.
Not sure what fits your tank? Tell us the tank and the outlet size, and we'll find the right fitting.
Tank outlets use BSP threads, and the size name isn't the measurement across the thread. Measure across the outside of a male thread and match it here:
| BSP size | Across the thread |
|---|---|
| 1/2″ | about 21 mm |
| 3/4″ | about 26 mm |
| 1″ | about 33 mm |
| 1 1/4″ | about 42 mm |
| 1 1/2″ | about 48 mm |
| 2″ | about 60 mm |
| 3″ | about 88 mm |
A male thread is on the outside of the fitting. A female thread is on the inside. Check which one your tank's outlet has, then choose a fitting with the opposite, so the two screw together.
Use a reducing bush or reducer to step down, for example from a 1 1/2″ outlet to a 3/4″ tap.
In the size filter, reducers and M/F outlets are listed under the size that screws into your tank.
If the water is for drinking, or the tank is connected to the mains, look for WRAS approved in the product name.
Not sure what you need? Give us a ring on 01308 479960, we're always happy to help.
Check the outlet size and whether its thread is male or female. If you're not sure, tell us the make and size of your tank and we'll check for you.
Yes. Tank outlets such as Hansen and QJ KwiQ Fit fit through a hole drilled in the tank wall. Check the product page for the hole size, or call us and we'll talk you through it.
Wrap a few turns of PTFE tape around the male thread, in the same direction the fitting screws in, then tighten it by hand and finish with a spanner. Don't over-tighten plastic threads.
The delivery time is shown on every item, so you can see it before you order.
With a wide range of water tank fittings, suitable for plastic water storage tanks, including fresh water tank fittings and outlets.
Shurflo Pumps