Etills 2 x 10,000 Litre Fire Water Tank System
The Etills 2 x 10,000 Litre Fire Water Tank System gives you 20,000 litres of fire water across two low tanks. Each tank is just 1990mm tall, so this layout suits sites where height is limited, for example under a canopy or near overhead lines.
Pipework joins the two tanks into a single fire outlet. As a result, the fire service can draw from both tanks through one connection.
Linking and Fittings
2.5″ Instantaneous Coupling system includes:
- 2 x tank connectors, one per tank
- 2 x plastic ball valves, so each tank can be isolated
- 2 x 90 degree elbows
- 1 x tee piece to join the tanks into one outlet
- 1 x 2″ brass gate valve
- 1 x 2.5″ instantaneous twist female x 2″ BSP male adaptor
- 1 x 2.5″ instantaneous male blank plug
4″ BSRT system includes:
- 2 x tank connectors, one per tank
- 2 x plastic ball valves, so each tank can be isolated
- 2 x 90 degree elbows
- 1 x tee piece to join the tanks into one outlet
- 1 x 4″ brass gate valve
- 1 x 4″ BSP male x 4″ BSRT female adaptor
- 1 x 4″ BSRT blank cap
Tank Details
- 2 x 10,000 litre tanks, 20,000 litres in total
- Each tank 2700mm diameter x 1990mm high
- Black MDPE to block light
- 600mm access lid on each tank
- Moulded lifting points
Layout Advice
First, place both tanks side by side on one level concrete base. Then leave enough room between them for the linking pipework. Before ordering a 2 x 10000 litre fire water tank system, confirm the total volume and coupling type with your fire authority.






