Etills 25,000 Litre Fire Water Tank System
The Etills 25,000 Litre Fire Water Tank System is the largest single tank fire system in the Etills range. A 25,000 litre vertical tank comes with a full fire fitting kit, giving larger sites a dependable emergency supply in one place.
It is a common choice for warehouses, factories, farm buildings and care homes where the nearest hydrant is too far away or the mains flow is too low for fire fighting.
Fitting Options
2.5″ Instantaneous Coupling, for the standard hose connection carried by most UK fire appliances:
- 2″ brass male tank connector
- 2″ plastic ball valve
- 2″ brass gate valve
- 2.5″ instantaneous twist female x 2″ BSP male adaptor
- 2.5″ instantaneous male blank plug
4″ BSRT, for a bigger connection and higher flow when the fire service draws from the tank:
- 4″ brass male tank connector
- 4″ plastic ball valve
- 4″ brass gate valve
- 4″ BSP male x 4″ BSRT female adaptor
- 4″ BSRT blank cap
Tank Specification
- 25,000 litre capacity
- 2700mm diameter x 4480mm high
- Medium density polyethylene in black to block light
- Weather and impact resistant for outdoor use
- 600mm access lid
- Pre moulded lifting eyes
- Top connection points for pipe sizes up to 6″
Planning Your Installation
Ask your fire authority or building control to confirm the volume and coupling they expect, as this differs from site to site. The 25,000 litre fire water tank needs a flat, level concrete base at least as large as its 2700mm footprint, with clear access for a lorry to reach it.








