Etills 10,000 Litre Fire Water Tank System
The Etills 10,000 Litre Fire Water Tank System gives a property its own store of water for the fire service to draw from. It pairs a 10,000 litre round tank with a complete set of fire fittings, so it arrives ready to plumb in without hunting for parts.
It suits farms, rural homes, holiday parks and small commercial sites that sit a long way from a hydrant, or where planning or building control has asked for water to be held on site.
Choose Your Fittings
2.5″ Instantaneous Coupling: the push and twist connection used on most UK fire appliances. The kit includes:
- 2″ brass male tank connector
- 2″ plastic ball valve
- 2″ brass gate valve
- 2.5″ instantaneous twist female x 2″ BSP male adaptor
- 2.5″ instantaneous male blank plug
4″ BSRT: a larger British Standard Round Thread connection that allows a faster draw off. The kit includes:
- 4″ brass male tank connector
- 4″ plastic ball valve
- 4″ brass gate valve
- 4″ BSP male x 4″ BSRT female adaptor
- 4″ BSRT blank cap
Key Features
- 10,000 litre capacity
- 2700mm diameter x 1990mm high
- Black MDPE, UV stabilised and resistant to algae growth
- 600mm access lid on top
- Moulded lifting points for positioning
- Top inlet positions for pipework up to 6″
Before You Order
Fire water requirements vary between areas, so check with your local fire authority or building control which volume and connection type they need before you buy. A 10,000 litre fire water tank must sit on a flat, level base that is at least as large as its footprint.






